NEOGEN Reveal 3-D Allergen Rapid Test Milk Total

Reveal 3-D Milk Total Allergen Rapid Test for the qualitative analysis of milk residues. Suitable for testing residues in CIP rinse water, environmental samples, food ingredients, and processed foods. Ideal for simple and quick use directly on-site, providing results in just 10 minutes.

• Allergen rapid test for the presence of milk residues.
• For testing CIP rinse water, food samples, or environmental samples.
• Suitable for testing food ingredients and processed foods.
• This rapid test is supplied as a complete kit, including accessories.
• Results are obtained within 10 minutes.
• Uses lateral flow (lateral flow device - LFD).
• Rapid flow test cassettes for the detection of allergenic food proteins.
• The amount of milk present is determined using the 3 lines on the instrument.
• Contains 10 tests with the accompanying accessories.
• Preferably store the milk rapid tests at 2 to 8°C.
• Intended exclusively for professional and trained personnel.
• Widely used within the food and beverage industry.

The presence of milk is made visible by means of specific antibodies. Reveal 3-D for Milk is a unique screening instrument with a 3-line readout: a control line confirms that the method has been performed successfully, and two other lines distinguish non-detectable, low, and high levels of milk presence.

This test is suitable for both raw and prepared products. Burnt products cannot be analyzed with this test. For a number of products with specific characteristics (acidity, high tannin content) or with high absorbent properties (flour, meal), it is advisable to dilute the product or use less product.

This test is not suitable for cheese products, as insufficient milk proteins can be released from cheese. Analysis of acidic or salty products with a low pH value and products containing many thickeners may yield an invalid result.

The procedure
1. Add the extraction buffer to the sample tube.
2. Add 0.25 ml of sample (CIP rinse water or cotton swab) to the sample tube.
3. Apply the cap and shake for one minute.
4. Remove the cap and fill it with liquid from the tube.
5. Immerse the Reveal 3-D instrument in the liquid in the cap.
6. Leave the instrument in it until liquid flows into the test window.
7. Place the device on a flat surface and allow the test to develop for 5 minutes.

Contents of the Reveal 3-D Milk Total test kit
- 10 light blue Reveal 3-D Milk Total test instruments
- 10 sachets of Extraction Buffer
- 10 sample tubes including caps
- 10 individually packaged sterile cotton swabs with break-off point
- 1 bottle of wetting solution
- instruction manual