NEOGEN AccuClean Advanced protein test

AccuClean Advanced protein test, a highly sensitive swap test method for protein detection. Very accurate and detects up to 10 μg of protein in just 10 seconds on surfaces or in solution. Indicates the relative protein level detected on a sampled surface. Ideal for real-time monitoring of effective cleaning.

• Highly sensitive test method for the detection of proteins in solution or on surfaces.
• Test to indicate the relative protein level on the surface.
• Effective environmental test of surface or liquid in 10 seconds.
• Highly sensitive: result at only 10 µg protein per sample.
• Provides a reliable indication of the cleaning performed.
• User-friendly and can be applied by any employee.
• Quickly and easily check hygiene status and procedures.
• Ready for immediate use, no further investment or accessories required.
• The sample collection sponge is already damp.
• Result can be read without the need for instruments.
• The test does not react with hydrogen peroxide.
• Swap suitable for single use.
• Suitable for professional use only.
• Supplied per box of 100 tests. After 10 seconds, the remaining solution is then compared to a color comparison table for interpretation. If no protein is detected, the solution at the bottom of the beaker remains copper-colored to indicate that the surface is clean. A color change to gray indicates that a low protein level has been detected, while a change to green/blue or blue indicates a higher protein level has been detected. Ready to use immediately and can be used without further purchase of accessories. Very user-friendly and can be used by employees without extensive training. Test procedure Remove the sampling part of the device and place the end with the pad on the surface to be tested. To sample, cross a 10 x 10 cm section of the surface.
  
  Activate
  Place the back into the cartridge and activate by pressing it fully into the cartridge. Gently rotate the cartridge for 10 seconds.
  
  Interpret
  Read by examining the color of the remaining solution using the supplied comparison table.