Ebro EBI 20-TH1 temperature and humidity datalogger

The Ebro EBI 20-TH1 is a temperature and humidity data logger with an internal sensor. The logger can store up to 8,000 measurements in memory and can be read at any time. An internet connection is not required for this. The temperature and humidity logger features a large LCD display, is powered by a lithium battery, and is programmed via PC.

• Waterproof temperature and humidity data logger with internal sensor.
• The logger can store up to 8,000 measurements in memory and can be read at any time; an internet connection is not required for this.
• The temperature logger features a large LCD display.
• It is powered by a lithium battery (replaceable).
• Programmed via PC.
• The temperature logger complies with HACCP, BRC, IFS, and ISO22000.
• Includes ISO calibration certificate (temperature).
• Equipped with an LED alarm.
• Please note: For programming and reading data, in addition to the data logger, a reading station/interface (sold separately) and software are required.

For programming the EBI 20-TH1 and reading data, in addition to the temperature logger, a reading station/interface (sold separately) and software are required.

- Reading station/interface
- USB cable connecting the reading station to the PC
- Winlog.basic software

When the temperature and humidity logger in Once the system is activated, the current measured value is shown on the display. In addition to the current value, it is also possible to display the highest and lowest measured values. To do this, the START button must be pressed for 3 seconds. The display changes with each button press.