Ebro EBI 20-T1 data logger temperature

The Ebro EBI 20-T1 is a temperature data logger with an external sensor. It can be used for both core and immersion measurements. The logger can store up to 40,000 measurements in memory and can be read at any time. An internet connection is not required for this. The temperature logger features a large LCD display, is powered by a lithium battery, and is programmed via PC.

• Affordable, waterproof temperature logger for measuring and recording core or immersion measurements.
• The logger can store up to 40,000 measurements in memory and can be read at any time; an internet connection is not required for this.
• The temperature logger features a large LCD display.
• It is powered by a lithium battery.
• Programmed via PC.
• The temperature logger complies with HACCP, BRC, IFS, and ISO22000.
• Please note: In addition to the temperature logger, a readout station/interface (sold separately) and software are required for programming and reading data.

In addition to the temperature logger, a readout station/interface (sold separately) and software are required for programming the EBI 20-T1 and reading data.

- Readout station/interface
- USB cable connecting the readout station to the PC
- Winlog.basic software

Once the temperature logger is put into operation, the current measured value is displayed. In addition to the current value, it is also possible to display the highest and lowest measured values. To do this, the START button must be pressed for 3 seconds. The display changes with each press of the button.